Ionicore IC-10CCB CB Line Filter 2"x10" F1/4 - 10 µm COD: CL-R002330

Inline filter carbon block coconut derived from the coconut shell for a high efficiency absorption rate.
Reduction of chlorine, odor, color, taste, dirt, rust, suspended matter not visible to the naked eye, mold, algae. Ideal for water coolers and post osmosis.
They were designed to be placed inside machinery.

Improve the taste of drinks.
 Protects from blockages, corrosion and wear.
It does not require energy electric.
Horizontal or vertical installation.
The filter is easy to install and replace without the use of special tools.

The cartridge change must be done when the capacity has reached, or when the flow arrives too slow (falls below 0.7bar/10psi), every 6 months or at most 1 year.
The life of a cartridge varies according to:
of the quality of the incoming water
of the required capacity
of the incoming water pressure
of the filter use (continuous or intermittent)

After installing the new cartridge, it is advisable to let the water flow through the filter at maximum pressure and maximum flow rate for at least 5 minutes to allow the air present in the cartridge to be purged.

INLINE cartridges do not require heads or bayonet fittings for their installation and can be positioned in any position (horizontal or vertical).

Do not use where water is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. All systems must be maintained according to the manufacturer's instructions.
Note: The pollutants removed or reduced by this system are not necessarily in your water.